Official Luthiers Forum!

Jimmy, I tried 3 times to answer your question on that thread. But it wouldn't let me for some reason. Kept throwing my answer into the cyber dump.
Let me see if this will work.
Answer--yes I use the StewMac jig for gluing up wood bindings and purflings. The teflon helps resist instant bond to the jig. Even so, as a precaution, I use a strip of masking tape where the binding slides, so that when it clogs, I can just replace the tape.

I hope this gets through... and I hope the info helps.

Steve

_________________
From Nacogdoches...the oldest town in Texas.

http://www.stephenkinnaird.com

Steve,

Thanks for the information. I'll pick one up on my next order from Stewmac.

_________________
Jimmy Caldwell
http://www.caldwellguitars.com